WhatsApp/WeChat/Skype/Phone:+8618625503172
Mauritius Inquiry for Clamp Anchor and MV ABC
MV-ABC are suitable for aerial installation and for public power distribution networks with rated voltages of 6/10 Up to and including 18/30 KV, Fixed for pylons, clamped to tunnel walls , etc. Assembled cores are the same as the ones of MV underground cables. Hence, they can be buried if necessary.
(Manufactured under IEC 60502-2 Standards)
Cross section – 50mm2 (Approx. 9mm Diameter)
Normal Thickness of PVC Sheath – 1.2mm (Produced under BS 3288-1 Standards)
Minimum Break Load of 64kN
Modulus of Elasticity – 1.6 GPs
Co-efficient of Linear Expansion – 11 x 10-6 per °C
Shall be hot dip galvanized
Able to accommodate above mentioned steel messenger
Supplied with U-channel fixing bracket that may be fixed to a pole by two 16mm diameter bolts
The tensile strength of the hardwares shall be at least 70kN. The Slipping strength of the champ shoud be at least 95% of the rated tensile strength of the steel messenger.
Contact Us for Price List: Email: info@qingzhou-cable.com
*Describe Your Buying Requirements in Detail